Section 2: Configuration
March 2014
Figure 2-1. Wiring the transmitter (4-20 mA HART)
A. Vdc supply
250 (necessary for HART communication only)
B. R
L
2.4.2
Configuration tools
Figure 2-2. Wiring the transmitter (1-5 Vdc Low Power)
A. DC power supply
B. Voltmeter
Configuring with a field communicator
There are two interfaces available with the Field Communicator: Traditional and Dashboard
interfaces. All steps using a field communicator will be described using Dashboard interfaces.
Figure 2-3 on page 11
readiness
www.emersonprocess.com or www.hartcomm.org to download latest DD library.
Field Communicator menu trees and Fast Keys are available in
menu trees and Fast Keys
10
shows the Device Dashboard interface. As stated in
, it is critical that the latest DD's are loaded into the Field Communicator. Visit
.
00809-0100-4108, Rev BA
A
B
A
B
Section 2.3-System
Appendix C: Field communicator
Reference Manual
Configuration