Table of Contents
Advertisement
Configuration
January 2018
2.6.2
Configuration tools
Configuring with a Field Communicator
There are two interfaces available with the Field Communicator: Traditional and Dashboard interfaces.
All steps using a Field Communicator will be described using Dashboard interfaces. HART shows the
Device Dashboard interface. As stated in
into the Field Communicator. Visit
Field Communicator menu trees and Fast Keys are available in
Trees and Fast
Figure 2-5. Device Dashboard
2051 FT 45B
Online
1. Overview
2. Configure
3. Service Tools
Configuring with AMS Device Manager
Full configuration capability with AMS Device Manager requires loading the most current Device
Descriptor (DD) for this device. Download the latest DD at
Note
All steps using AMS Device Manager will be described using version 11.5.
Configuring with a local operator interface
The LOI requires option code M4 to be ordered. To activate the LOI push either configuration button.
Configuration buttons are located on the LCD display (must remove housing cover to access), or
underneath the top tag of the transmitter. See
Figure 2-6
require multiple screens for a successful configuration. Data entered will be saved on a screen-by-screen
basis; the LOI will indicate this by flashing "SAVED" on the LCD display each time.
LOI menu trees are available in
10
Emerson.com
Keys.
SAVE
for configuration button location. When using the LOI for configuration, several features
Appendix D: Local Operator Interface.
System readiness
, it is critical that the latest DD's are loaded
or
FieldCommGroup.org
Appendix C: Field Communicator Menu
Emerson.com
Table 2-2
for configuration button functionality and
Reference Manual
00809-0300-4410, Rev BA
to download latest DD library.
or FieldCommGroup.org.
Configuration
Advertisement
Table of Contents
