Screensaver - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Operating the Control Panel
5.3 System Properties
5.3.3

Screensaver

Under "Screensaver" you define the time until the automatic activation of the screensaver
and the brightness of the backlight when the screensaver is active.
NOTICE
Activating the screensaver
If an image is displayed on the screen for long time, its outline may remain dimly visible on
the display.
This effect is reversible when you use a screensaver. Therefore, activate the screensaver.
General Settings
● "Enable screensaver": Select this option to activate the screensaver.
Default setting: "deactivated".
● "Wait time": Time to activate the screensaver, value range 1 to 120 minutes in 15-minute
increments. Default setting is "1 min."
The screensaver is automatically activated if the HMI device is not operated within the
specified period of time.
Brightness of screensaver
Use the slider to set the desired display brightness of the screensaver, value range
0 to 100%. Default setting is "30 %".
To deactivate the screensaver, tap the touch screen briefly. For safety reasons, this touch is
not evaluated as an operator action. Therefore, no unintentional functions can be triggered.
The screensaver is also deactivated if the HMI device is accessed remotely, e.g. via
Sm@rtClient or the configuration PC.
80
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA