Interfaces - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Rear view
①
②
1.4

Interfaces

The figure below shows the interfaces of the Unified Comfort Panels using the interface plate
of the devices with display diagonal ≥15" as an example.
①
②
③
④
⑤
For devices with display diagonal ≤12 ", there is another threaded hole above the
"Maintenance" button for fixing the strain relief plate.
See also
Description of the interfaces (Page 160)
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
Position of rating plate
Safety lock for the SD memory card slot cover
X51: Slot for the data memory card, left
•
X50: Slot for the system memory card, right
•
For a detailed description, see section "Memory concept and memory cards (Page 69)"
X80 power supply connector
Connection for equipotential bonding
(functional grounding)
X20 RS422/485 (SUB-D)
X2 PROFINET (LAN), 10/100/1000 Mb
"Maintenance" button
⑥
X1 PROFINET (LAN), 10/100 Mbit
⑦
X61 USB
⑧
X62 USB
⑨
X63 USB
⑩
X64 USB
Overview
1.4 Interfaces
15