Technical Information; Software License Agreements; Labels, Certificates And Approvals - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Technical information

8.1

Software license agreements

Open Source Software
Observe the software license agreements for Open Source Software on the supplied "Open
Source Software License Conditions" data medium.
8.2

Labels, certificates and approvals

Note
Approvals on the rating plate
The following overview shows possible approvals.
Only the approvals specified on the rating plate apply to the device.
CE marking
The devices meet the general and safety-related requirements of the following EU directives
and conform with the harmonized European standards (EN) published in the official gazettes
of the European Union and confirmed in the EU Declarations of Conformity:
● 2014/35/EU "Electrical equipment for use within certain voltage limits" (Low-Voltage
Directive)
● 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
● 2011/65/EU "Directive of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment" (RoHS Directive)
When the device has Ex approval, the following also applies:
● 2014/34/EU "Equipment and protective systems intended for use in potentially
explosive atmospheres" (Directive for Explosion Protection)
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
8
139