Supported Gestures; Supported Gestures In The Control Panel; Supported Gestures In The Runtime Project - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Operating the device

4.3 Supported gestures

4.3 Supported gestures
4.3.1

Supported gestures in the Control Panel

The following touch gestures are available in the Control Panel.
Icon
If you open an app via the Control Panel, then the gestures supported by the app are also
available, for example, the "Scale" function in the "Web Browser".
4.3.2

Supported gestures in the runtime project

Various touch gestures are available for the runtime operation. Some touch gestures have
different effects in the process pictures than in the controls.
Note
No operation with three or more fingers.
Only use one or two fingers when operating with touch gestures.
If you use more than two fingers with touch gestures, this can cause incorrect operation.
In the case of multitouch operation with several fingers, you only operate the respectively
configured objects.
60
Gesture Behavior
Tap To activate an input object (such as input box, option button,
selection list), tap on the input object.
Vertical dragging To scroll vertically in the window pane or in lists, drag vertically in
with one finger the corresponding area with one finger.
Horizontal To scroll horizontally in the window pane or in lists or to set a
dragging with one slider, drag horizontally in the corresponding area with one finger.
finger
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA