Displaying The Web Setting Screen - Panasonic PressIT TY-WPS1 Operating Instructions Manual

Setting
Continued

Displaying the Web setting screen

■
About web browsers
We recommend using the web browsers shown below to operate the Web setting screen.
Chrome Version 85.0.4183.83 and later versions
Internet Explorer 11
Edge Version 84.0.522.52 and later versions
■
When configuring the settings in an environment without wireless access point in the
surrounding area
Connect to the wireless LAN of the receiver and open the Web setting screen. Note that while operating the web
settings using this method, the mobile device cannot be connected to Internet temporarily. SSID and a password
necessary for wireless LAN connection are displayed on the lower left of the standby screen.
1
Turn on wireless LAN of the PC or mobile device and select SSID displayed on the
standby screen.
Above example: PressIT-A132F34D
2
Enter the wireless LAN password.
Above example: 75847328
3
After the connection is complete, enter the IP address displayed on the lower right
of the standby screen into the address bar of the web browser, and press Enter.
* The IP address on the image is an example and may be different depending on the environment.
When connection is established correctly, the Web setting screen is displayed.
Web setting screen when accessed from PC
Web setting screen when accessed from smartphone
22 English
Firefox Version 80.0.1 and later versions
Safari Version.13.0.5 and later versions