Panasonic PressIT TY-WPS1 Operating Instructions Manual page 23

■
When configuring the settings in an environment where wireless LAN (5GHz band) access
point can be used freely
Connect the receiver to the external wireless LAN and open the Web setting screen. You can also connect to the
external wireless access point different from the wireless access point coming from the receiver to open the Web
setting screen. The advantage of this method is that logging in to the Web setting screen is possible with the mobile
device connected to the network. However, the password of the external wireless access point must be obtained
beforehand.
Obtain the password, etc. from the system administrator managing the local network.
1
After opening the Web setting screen with the procedure in "When configuring the
settings in an environment without wireless access point in the surrounding area"
(page 22), log in with administrator privileges and select "Network Management".
2
Click "Connect to 5GHz Wireless".
* When a network cable is connected to the receiver, DHCP of the wired LAN is prioritized.
3
Select SSID to connect and enter the password.
This is a state where connection to Internet is established via external wireless access point.
English 23