Panasonic PressIT TY-WPS1 Operating Instructions Manual page 30

Setting
Continued
●
WPA/WPA2 Enterprise
Using this function, an electronic certificate key file supporting encryption communication can be uploaded. This
function is designed for persons in charge of information system department and network administrators.
●
Upgrade
●
Download Pairing File
Download the pairing file and save it on a USB flash drive.
After downloading is complete, perform step 5 and the subsequent steps in "Pairing by saving a file to the USB
memory" (page 17) to copy the pairing file to the transmitter.
The receiver and transmitter of the TY-WPS1 basic set are paired at the time of shipment. When the transmitter is
initialized or a new transmitter is additionally purchased, pairing with the receiver is required before using.
●
Background Color setting
Specifies the background colors for the standby screen and no-signal image.
[Black] or [Blue] can be specified.
Note
• When the [My Screen] is specified, this setting is not reflected.
30 English
The firmware of the receiver and transmitter can be to the latest versions. This
product needs to be stably connected to Internet to upgrade the firmware.
It is strongly recommended to use the same firmware version for the receiver
and transmitter upgraded of this product.
The firmware can be upgraded with the following method.
Connect the transmitter to an external power source.
Confirm that the receiver is connected to Internet and the receiver and
transmitter have been paired.
Click the [Select All] check box to upgrade all the firmware of the receiver
and transmitter collectively.
Tap the [Update] button to start downloading the latest firmware. This
process will finish in a few minutes. Please wait for a while.
Note
• The firmware upgrade information displayed for [Upgrade] on the [Detail
Settings] menu shows the confirmation result of the receiver version.
• When the firmware upgrade for the receiver is available, a mark to prompt
you to upgrade the firmware is displayed on the receiver at the lower right of
the standby screen.