Panasonic PressIT TY-WPS1 Operating Instructions Manual page 24

Setting
Continued
When the receiver is connected to the external wireless access point, the wireless LAN icon is displayed on the
lower right of the standby screen.
To store the external wireless access point in the receiver, set [Remember Wireless Access Point] to [ON] and click
[OK]. The system restarts.
4
To open the Web setting screen from the PC or mobile device, confirm that it is
connected to the same wireless access point as that of the receiver, enter the IP
address displayed on the lower right into the address bar of the web browser, and
press Enter.
When connection is established correctly, the Web setting screen is displayed.
Web setting screen when accessed from PC
24 English