Panasonic PressIT TY-WPS1 Operating Instructions Manual page 17

Pairing by saving a file to the USB memory
Supported device
●
Commercially available USB memory devices are supported. (Those with security functions are not supported.)
●
USB memory devices other than those formatted in FAT16 or FAT32 cannot be used.
●
Up to 32 GB of USB memory in size are supported.
●
Only single partition configuration is supported.
1
Connect the USB memory to the USB terminal of the receiver.
1
2
Press the FUNCTION button.
The LED lights up in white and the pairing file is saved to the USB memory.
3
Remove the USB memory.
4
Slide the mode switch to the EXT side.
5
Supply power to the transmitter.
6
Connect the USB memory to the USB terminal of the transmitter.
7
Pairing is complete.
The main LED of the transmitter lights up in white.
8
Remove the USB memory from the transmitter.
2
5
5 V/0.9 A
Power supply
6
English 17 17