Image Signals Supported By This Product; Troubleshooting - Panasonic PressIT TY-WPS1 Operating Instructions Manual

Image Signals Supported by This Product

■
Image output resolution of the receiver
3840 x 2160@30Hz RGB
1920 x 1080@60Hz RGB
4096 x 2160@24Hz
3840 x 2160@30Hz
3840 x 2160@25Hz
3840 x 2160@24Hz
1920 x 1080@60Hz
■
Image input resolution of the transmitter
WPS Transmitter (TY-WPB1)
HDMI input-supported signals
1920 x 1080@60Hz
1920 x 1080@50Hz

Troubleshooting

Symptoms
Pairing does not start by connecting the transmitter
to the USB terminal of the receiver.
Pairing does not start by connecting the USB
memory where the pairing file is stored to the USB
terminal of the transmitter.
Touch information is not sent to the PC although the
USB cable of the touch module is connected to the
receiver.
Forgot the login password for the Web setting
screen.
The main LED and sub LED of the transmitter do not
light up properly.
HDMI-CEC function does not work.
WPS Receiver (TY-WPR1)
HDMI output signals
WPS USB-C Transmitter (TY-WPBC1)
●
Is the mode switch of the transmitter on the STD
side?
●
Is the mode switch of the transmitter on the EXT
side?
●
Is the mode switch of the transmitter on the STD
side?
●
Some devices do not support the touch module.
●
After activating the receiver, press and hold the
reset button for 5 seconds or more. The password
is initialized.
●
Power supplied to the transmitter may be
insufficient. Change the power source for the
transmitter.
●
When power is supplied from the USB terminal
of the display or projector to the receiver, the
power may become insufficient when the power
is turned off. Change the power source for the
receiver.
1920 x 1080@50Hz
1920 x 1080@24Hz
1280 x 960@85Hz
1280 x 720@60Hz
1280 x 720@50Hz
1024 x 768@70Hz
USB-C input-supported signals
1920 x 1080@60Hz
1920 x 1080@50Hz
Checks Page
16
17
9
12
11
English 45 45