Advertisement
On/Off Switch
The Seated Independent Stepper is
moulded plug already fitted and plug-in external power supply adaptor. Plug the cable out of
the adaptor into the input socket at the front of the
power cable into the adapter and into a suitable mains socket and then switch on the power.
Switch on the Seated Independent Stepper via the on/off (I / O) switch mounted at the front of
the machine. The Console should begin its boot-up cycle. The Series 3 Consoles will show a
message indicating it is initialising (which takes approximately 2 minutes). This indicates that
the Seated Independent Stepper is now ready for use.
NOTE: If the Seated Independent Stepper is not going to be used straight away, then switch off
and remove the 13A plug from the socket.
CAUTION - Ensure that the mains cable is routed in such a way that it does not create a
potential hazard to users of the or others persons in the vicinity.
delivered with a separate
ON/OFF
Switch
power cable which has a
Seated Independent Stepper
Power
Input Socket
7
, then plug the
Advertisement
