Advertisement
Assembly Step 7
Steps
No.
1
12
14
Cap Head Socket Screw
7
18
19
12
Procedure:
Slide the
hole, making sure that the console cables do not get trapped and are threaded through the large hole
and threaded underneath the front foot cover. Insert the console pole onto the top of the locator and
insert screws, check alignment and tighten. Then push the console pole cover into position.
Please note: Once the console pole cover has been pushed into position it will not be able to be
released.
Tools Required : 6mm Allen Key
Description
Main Body
Plain Washer
Front Foot Cover
Console Pole
18
console pole cover up the console pole, so that it is out of the way of the bolt
Specifications
Qty
Φ21*Φ10.5*1.25
M10*30
19
26
1
4
4
1
1
Advertisement
