Advertisement
General Maintenance Information
Cleaning the Equipment
PULSE FITNESS Approved Cleaners (United States Availability Only)
Two preferred cleaners have been approved by PULSE FITNESS reliability experts: PureGreen
24 (or equivalent) and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime
and sweat from equipment. PureGreen 24 (or equivalent) and the antibacterial formula of Gym
Wipes are both disinfectants that are effective against MRSA and H1N1. PureGreen 24 (or
equivalent) is available in a spray which is convenient to use. Apply the spray to a micro fibre
cloth and wipe down the equipment. Use PureGreen 24 (or equivalent) on the equipment for at
least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral
control. Gym Wipes are large, durable pre-moistened wipes to use on the equipment before
and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general
disinfection purposes.
Contact PULSE FITNESS Global Service Team to order these cleaners +44 (0)1260 294600 or
email: global.service@pulsefitness.com.
Compatible Cleaners
DO NOT use water based solutions (on the following): Clean the display console, all exterior
surfaces and the frame with a mild, non-abrasive silicon based household cleaner. Apply via a
soft micro fibre cloth. Apply the cleaner to the cloth before cleaning. DO NOT use ammonia or
acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT
apply cleaners directly to the equipment surfaces.
DO use water based solutions (on the following): Clean the upholstery and handgrips with a
mild soap and water solution.
Preventive Maintenance Tips
PULSE FITNESS products are backed by the engineering excellence
and reliability of PULSE FITNESS and are one of the most rugged and
trouble-free pieces of exercise equipment on the market today.
Note: Safety can be maintained only if the equipment is examined
regularly for damage or wear. Keep the equipment out of use until
defective parts are repaired or replaced. Pay special attention to parts
that are subject to wear, as outlined below.
The following preventive maintenance tips will keep the PULSE
FITNESS product operating at peak performance:
Locate the product in a cool, dry place.
Clean the top surface of the pedals regularly.
Long fingernails may damage or scratch the surface of the Console; use
the pad of the finger to press the selection buttons on the Console.
39
Advertisement
