Advertisement
Install Coaxial & Ethernet Cables (if necessary) - Series 2 & Series 3 Only
The following connection receptacles are located on one side of the 215H Seated Independent
Stepper:Coaxial Cable, and Ethernet Cable.
CAUTION: Connectors should easily fit into the receptacles. Forcing a connection may lead to
damage to the barrel connector and/or receptacle and may void product warranty.
Grounding Instructions
This PULSE FITNESS product must be properly grounded. If the unit malfunctions or breaks
down, proper grounding provides a path of least resistance for the electric current, which
reduces the risk of shock to anyone touching or using the equipment. Each unit is equipped
with an electrical cord, which includes an equipment grounding conductor and a grounding
plug. The plug must be inserted into an outlet that has been properly installed and grounded in
accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. DO NOT modify the plug provided with the product.
If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any
modification to the electrical plug will result in a voided warranty.
Note: This product is for use on a nominal 120-volt circuit and has a grounding plug that looks
like the plug illustrated in the figure. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this product.
120-Volt Grounded Plug
Grounded
Outlet
Grounding
Pin
NB: Image for illustration only
]
5
Advertisement
