Advertisement
Never insert objects into any opening in these products. If an object should drop inside, turn off
the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be
reached, contact PULSE FITNESS' Global Service Team.
Never place liquids of any type directly on the unit, except in an accessory tray or holder.
Containers with lids are recommended.
Do not use these products in bare feet. Always wear shoes. Wear shoes with rubber or high-
traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no
stones are embedded in the soles.
Keep all loose clothing, shoelaces, and towels away from moving parts.
Do not reach into, or underneath, the unit or tip it on its side during operation.
Do not allow other people to interfere in any way with the user or equipment during a workout.
Allow LCD consoles to "normalise" with respect to temperature for one hour before plugging the
unit in and using.
Use this product for its intended use as described in this manual. Do not use attachments that
have not been recommended by PULSE FITNESS, as such attachments may cause injury.
Read all warnings on each product prior to starting a workout.
If warnings are missing or damaged, please contact PULSE FITNESS immediately for
replacement warning labels.
Warning labels are shipped with every product and should be installed before product is used.
PULSE FITNESS is not responsible for missing or damaged warning labels.
This product may contain chemicals known to the State of California to cause cancer, birth
defects, or other reproductive harm. For more information refer to the European Commission
Regulation (EC) No. 1907/2006 (REACH) and the California Safe Drinking Water and Toxic
Enforcement Act of 1986 (Proposition 65).
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Read the entire manual before setting up the PULSE FITNESS Crossclimb (Seated
Independent Stepper). Place the Seated Independent Stepper where it will be used before
beginning the setup procedure.
Electrical Power Requirements
PULSE FITNESS Crossclimb (Seated Independent Stepper) requires an AC power supply
according to the electrical configurations listed in the chart below.
Supply Voltage Frequency Rated Current
115V
50/60Hz
0.4A
230V
50/60Hz
0.2A
Note: Do not modify the plug provided with this product. If the plug does not fit into an
available electrical outlet, have a proper outlet installed by a qualified electrician.
3
Advertisement
