Table of Contents
Advertisement
Arpeggiator function
The arpeggiator will not start
Is the ARP button turned on (lit)? (see page 158)
Is "MIDI Clock" (GLOBAL > MIDI) set to Internal or
Auto? See "MIDI Clock" on page 653 of the PG.
Is "All ARP Off" selected on the GLOBAL > Basic Setup-
Basic page? See "All ARP Off" on page 633 of the PG.
Drum Track/Step Sequence
Drum Track/Step Sequence does not
start
Is the DRUM button turned on (lit)?
The pattern won't start even though I pressed the DRUM
button.
Is the DRUM button blinking? Trigger Mode is set to Wait
KBD Trig. The pattern will start when you play the
keyboard, or when a note-on is received via MIDI. See
"Controlling how the Drum Track starts and stops" on
page 162.
The user pattern may be empty (no data), or "P000:Off"
might be selected. Also, an empty step sequence might have
been selected.
If there's no data in the pattern, the pattern won't play.
X-Y control
Can't control the volume
Is the Enable Volume Control check box checked?
Is the COMBINATION or SEQUENCER mode X-Y Assign
setting appropriate?
Have you checked the Enable Program X-Y Volume check
box so that the volume control of a program can be
reproduced in COMBINATION or SEQUENCER mode?
Drum Kits
The Drumsample's pitch does not change
You have left the Assign check box unchecked, and want to
play the Drumsample at the adjacent right a semitone lower,
but the pitch does not change.
Wave Sequences
The wave sequence does not advance
Is the Run check box checked?
Troubleshooting Arpeggiator function
Has a user pattern been selected that does not contain note
data?
If the arpeggio pattern fails to start in COMBINATION
mode, is the "Output Ch" set appropriately?
If the arpeggio pattern fails to start in SEQUENCER mode,
are the "Input Ch" and "Output Ch" set appropriately?
If you're in COMBINATION mode, is the Drum MIDI
Channel setting appropriate? See "Scene Common Setup"
on page 390 of the PG.
If you're in SEQUENCER mode, are the Drum Trigger
"Input Ch", "Drum MIDI Ch" settings appropriate? See
"Scene Common Setup" on page 460 of the PG.
Is the MIDI Clock parameter set correctly? See "MIDI
Clock synchronization" on page 174.
In the GLOBAL > Basic Setup– Basic page, is All Drum Off
checked? See "Globally disabling Arpeggiator and the Drum
Track/Step Sequence" on page 173.
CC control does not work
Is the Enable CC Control check box checked?
Are the X-Y X mode and X-Y Y mode settings appropriate?
In COMBINATION or SEQUENCER mode, are the Enable
Combi X-Y CC or Enable Song X-Y CC check boxes
checked?
Have you checked the Enable Program X-Y CC check box
so that the CC control of a program can be reproduced in
COMBINATION or SEQUENCER mode?
• If you have selected a drum program in PROGRAM
mode, and then want to edit the drum kit in GLOBAL
mode, go to the PROGRAM > Edit-Pitch, OSC1 Pitch
Mod. page and set Pitch Slope to +1.0 before you enter
GLOBAL mode.
Swing does not work properly
Is the wave sequence's Mode set to Tempo?
Is the wave sequence's Swing Resolution set appropriately?
239
Advertisement
Table of Contents
