Table of Contents
Advertisement
Appendices
E (Error–Exceeded)
Error in formatting medium
Meaning
An error occurred while performing a physical
:
format (full format) or high-level format (quick format) of
the media. To solve this problem:
• Use other media.
Meaning
When executing the MEDIA mode Utility page
:
menu command Convert to ISO9660 Format, an error
occurred while rewriting the UDF area. To solve this
problem:
• Use other media.
Error in mount process. Please backup
files
Meaning
An error was found on a UDF-format CD-R/RW
:
or DVD-R/RW disk. To solve this problem:
• Make a backup of the data, and stop using the disk which
caused the error.
Error in reading from medium
Meaning
An error occurred while reading data from media.
:
This error may also appear when data is being written to
media by a Save or Copy operation. To solve this problem:
• Execute the reading operation once again. If the same
error occurs, it is possible that the data on the drive has
been damaged.
Error in writing to medium
Meaning
A verification error occurred while writing data to
:
the internal disk or USB storage device. To solve this
problem:
• Use the Disk Utility page menu command Check
Medium to detect and repair errors on the media. For
more information, see "Check Medium" on page 728 of
the PG.
• It is possible that the media has been physically
damaged. Try another storage device, and avoid using
the one that produced the error.
Error: invalid option file
Meaning
While preparing to install an option (such as an
:
EXs), the system has detected corrupted data in the files to
be installed. To solve this problem:
• Copy the file to the USB media again, or if that fails,
download the data again.
Error loading Drumsamples.
Error loading Multisamples.
Meaning
When executing Change load method, a sample
:
could not be loaded correctly.
244
Error: not enough disk space for the
installation
Meaning
There is not enough space left on the internal
:
drive. To solve this problem:
• Remove data from the internal drive, backing it up to
USB media, in order to free up space.
Error unloading Drumsamples.
Error unloading Multisamples.
Error unloading Exs
Error unloading RAM
Meaning
When executing Change load method or Unload
:
all data from selected bank, a sample could not be
unloaded correctly.
Exceeded 1000 measure limit
Meaning: The length of the Standard MIDI file being
loaded would exceed the maximum of 1,000 measures.
Exceeded 16 Programs
Meaning
You exceeded 16 programs while performing
:
Advanced Conversion Load. When an AKAI Program is
loaded, it will be converted into multiple programs and one
combination according to its structure. At this time, the
maximum number of NAUTILUS programs resulting from
this conversion is limited to 16, which is the maximum
number of programs that can be used in a combination. To
solve this problem:
• Load the AKAI programs individually, and edit them on
the NAUTILUS.
• Instead of using Advanced Conversion Load, load the
multisamples or samples, and edit them on the
NAUTILUS.
Advertisement
Table of Contents
