Table of Contents
Advertisement
Playing and editing Programs
Using Compare command
When you're in the process of editing a sound, executing the
Compare command on Menu command will recall the saved
version of the sound, as it was before you started editing.
Executing the Compare command again returns you to the
version you are editing.
If you edit after having executed the Compare command,
your previous edits will be lost.
Saving your edits
Once you've tweaked the sound to perfection, you'll want to
save your work. To save your edits:
1. Select the Write Program command from the page
menu, at the upper right-hand corner of the screen.
This brings up a dialog box which allows you to save the
Program. Optionally, you can also select a new location,
change the Program's name, and assign it to a sound
category (such as keyboard, guitar, etc.).
2. Press the Program's name to bring up the text edit
dialog.
You can give the Program a descriptive name using the
on-screen keyboard.
3. After entering the name, press OK.
The text edit window will disappear, returning you to the
main Write dialog.
4. To set the category and sub-category, press the
"Category" and "Sub Category" pop-up buttons and
select the categories/sub-categories from the list.
5. To select the bank and number to save, press the
"Program" pop-up button, select the save destination
in the list and press the OK button.
You can write to any location in banks A-T. To avoid
overwriting the factory sounds, it's safer to use a slot in
one of the Banks P-T.
Important: HD-1 Programs can only be written to HD-1
Banks, and EXi Programs can only be written to EXi
Banks. For more information on the default Bank types,
and on how to change them, please see "Program Bank
Contents" on page 26, and "Changing the Program Bank
Types" on page 26.
6. After selecting the location, press OK.
7. Press OK again to start the write process.
8. If you're sure you want to write to this location, press
OK again.
After that, you're done!
For more information, see "Writing Programs and
Combinations" on page 205.
Saving edits to GM Programs
You can edit GM Programs, but you must then save them to
other banks; the GM Programs themselves cannot be over-
written.
Saving to media
You can also save and manage Programs on the internal
drive and USB storage devices. For more information, see
"Saving to internal drive, CDs, and USB media" on
page 209.
34
Advertisement
Table of Contents
