Loading The Samples Required By Programs Or Combinations - Korg NAUTILUS Series Operation Manual

Loading data from disk Loading the samples required by Programs or Combinations

Loading the samples required by Programs or Combinations

Loading samples required by a single
Program or Combination
Programs and Combinations may sometimes require sample
data that's not currently loaded. If this happens, the message
Samples Not Loaded appears at the top of the display. You
can easily load the required sample data, and save the results
so that it can be loaded automatically in the future. To do so:
1. Go to the Home page for the PROGRAM or
COMBINATION.
2. Select the menu command Load required samples.
This command is only available when the Samples Not
Loaded message appears at the top of the display.
A dialog box will appear, with a list of all of the missing
Multisamples, Samples, and/or Drum Samples required
by the Program or Combination, including the bank(s)
containing the data.
3. Select the "Load only required samples" radio button
to load the listed data.
The bottom of the dialog box shows the Memory
Required and (Memory) Available. If there isn't enough
room to load the samples, you'll need to un-load other
samples before continuing.
4. Press Load to load the data, or Cancel to exit without
loading.
5. Repeat as desired for other Programs or
Combinations.
If you'd like to automatically load the sample data in the
future:
6. Save the result as a new KSC file.
To do so, follow the instructions under "Saving a KSC
file" on page 181.
7. Set up the new KSC file to load automatically at
startup.
Follow the instructions under "Adding a KSC to the list"
on page 179.
Creating a custom sample set
Load required samples also lets you create custom sample
sets based on your favorite Programs, even if they use
different EXs or User Sample Banks. To do so:
1. Save any data you've created in SAMPLING mode.
(The next steps will erase all Sampling Mode Data.)
For more information, see "Saving a KSC file" on
page 181.
2. Go to the KSC Auto-Load page in GLOBAL mode.
3. Un-check all KSCs.
4. Press the Do Auto-Load Now button.
This clears out all other sample data, so that the KSC you
eventually save will include only the data loaded in step
5, below.
5. One by one, select the desired Programs. For each
one, use the Load required samples command to load
its sample data.
6. Select the "Save Sampling Data" page menu
command on the Save page in SAMPLING mode.
7. Save a new KSC with a different name (such as
Custom.KSC), with Include set to "Links to EXs and
User Sample Banks."
For more information, see "Saving a KSC file" on
page 181.
This new KSC now links to all of the sample data
required by the Programs.
8. Go to the KSC Auto-Load page in GLOBAL mode,
and re-enable KSCs as desired. Remember to include
your newly-created KSC!
Loading samples required by a bank of
Programs or Combinations
If a bank of Programs or Combinations all require a specific
EXs or User Sample Bank, you can easily load the whole
bank of samples at once. To do so:
1. Go to the Home page for the PROGRAM or
COMBINATION.
2. Select the menu command Load required samples.
3. Select the Load complete banks radio button to load
the entire bank(s) containing the data.
Check the Memory Required and (Memory) Available
to see that there's enough room to load the data.
4. Press Load to load the data, or Cancel to exit without
loading.
If you'd like to automatically load the sample data in the
future:
5. Save the result as a new KSC file.
To do so, follow the instructions under "Saving a KSC
file" on page 181.
6. Set up the new KSC file to load automatically at
startup.
Follow the instructions under "Adding a KSC to the list"
on page 179.
217