Table of Contents
Advertisement
Appendices
File/path not found
Meaning: When loading a sample file in MEDIA mode,
executing the Delete command, or selecting a disk or
directory in a dialog box, the specified file name does not
exist.
Or, when executing the Copy command in the MEDIA
mode Utility page, and you used a wildcard to specify the
copy file name, the specified file was not found.
Meaning: In MEDIA mode when you used the Open button
to open a directory, the path length including the selected
directory name exceeded 76 characters.
Or, when using the Copy command in MEDIA mode, the
length of the copy source path exceeded 76 characters.
• Rename the file and/or directories using shorter names,
so that the file path fits within 76 characters. The file
path includes the file name and the names of all parent
directories up to the root level of the disk.
• Check the file or directory.
H
HD Protected
Meaning: The internal SSD is protected. To solve this
problem:
• On the Global-Basic tab, under Memory Protect, turn off
(un-check) the Internal HDD Save check box.
I (Illegal–Index)
Illegal file description
Meaning: The filename that you specified when saving a
file or creating a directory contained invalid characters. To
solve this problem:
• Change the filename you are specifying. Filenames not
permitted by MS-DOS cannot be used as a filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a
Standard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
format other than 0 or 1.
246
Front sample data used in rear sample
Meaning: When executing Link in the SAMPLING mode
Sample Edit page, the sample data of the front sample is also
being used by the rear sample, and therefore cannot be
overwritten. To solve this problem:
• Instead of using Overwrite, specify a different sample as
the save-destination.
Inconvertible file exists
Meaning: A file that cannot be used with ISO9660 format
exists on the media. To solve this problem:
• Media that was formatted or written by a device other
than the NAUTILUS may be impossible for the
NAUTILUS to convert into ISO9660 format. To perform
the conversion, use the packet writing software that was
used to format or write the media.
Index number over limit
Meaning: When sampling into RAM in COMBINATION,
PROGRAM, or SEQUENCER mode, there are too many
indexes to be simultaneously converted into a multisample.
• Either convert the samples into a different program or
multisample, or use SAMPLING mode to delete some of
the indexes before you continue sampling.
Invalid option file
Meaning
While preparing to install an option (such as an
:
EXs), the system has detected corrupted data in the files to
be installed. To solve this problem:
• Copy the file to the USB media again, or if that fails,
download the data again.
Can't overwrite
Advertisement
Table of Contents
