4.10 Outer Flip Cover
Replacement Procedure
•
To remove the old part, perform sections 3.1.1 – 3.1.2 of the flip disassembly.
Tools needed to perform the following steps:
1. Obtain a new outer flip cover.
2. Remove the protective film from the non-logo side
of the co-brand bezel.
3. With the adhesive side of the bezel towards the outer
flip cover, insert the bezel into its cavity in the outer
flip cover.
NOTE!
4. Apply pressure simultaneously to the upper and
lower ends of the bezel for 5 seconds.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Avoid getting dirt, oil, or finger prints on the
inside surface of the bezel's window.
Working Instruction, Mechanical
•
Style 2A ESD tweezers
42(113)