Camera Key - Sony Ericsson Z520a Working Instruction

9. Rotate the black retaining bar into a horizontal
orientation. Then press down on the retaining bar
until it is completely closed.
•
Perform all sections of the Flip Reassembly

4.22 Camera Key

The removal and installation of this part is covered in the base disassembly and reassembly
procedures. To remove this part, perform sections 2.1.1 - 2.1.3 of the base disassembly. To install
this part, perform sections 2.2.3 - 2.2.5 of the base reassembly. If this part is being replaced, a new
part should be used in the place of the old part when performing the reassembly instructions.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
69(113)