Sony Ericsson Z520a Working Instruction page 98

6. Position the end of the main flex film that contains
the circuit board connection over the top of the large
continuous hinge arm as shown.
7. Rotate the two small hinge arms up out of the way
and place the LCD sub-frame down onto the inner
flip cover so that features in the LCD sub-frame
align to the screw bosses on the inner flip cover.
8. Rotate the two small hinge arms down onto the LCD
sub-frame.
•
Perform sections 3.2.2 - 3.2.3 of the Flip Reassembly Procedure.
•
Perform the Antenna Cover Installation Procedure.
•
Perform sections 2.2.2 - 2.2.5 of the Base Reassembly Procedure.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
98(113)