Liquid Intrusion Indicator; Liquid Intrusion Indicator Removal; Liquid Intrusion Indicator Installation - Sony Ericsson Z520a Working Instruction

4.29 Liquid Intrusion Indicator

4.29.1

Liquid Intrusion Indicator Removal

If a liquid intrusion indicator is activated, handle the unit according to the instructions of your
Sony Ericsson representative.
4.29.2

Liquid Intrusion Indicator Installation

Tools needed to perform the following steps:
•
NOTE!
1. Orient the system connector so that the side of the
connector with the row of small holes is oriented
towards you and the portion of the connector that is
end user accessible is oriented downward.
2. Using tweezers, obtain a liquid intrusion indicator
and place it so that its top and left edges are aligned
with the top and left edges of the connector's upper
surface.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Style 2A ESD tweezers
Whenever the phrase "pry tool" is used, a nylon pointer, an orange stick, or a front opening
tool may be used, depending on the user's preference.
•
Pry tool
Step-by-Step Instructions
Working Instruction, Mechanical
81(113)