Hinge Installation - Sony Ericsson Z520a Working Instruction

7. Work the hinge from around the main flex film.
8. Once separated from the main flex film, set the hinge
aside.
4.34.2

Hinge Installation

If the hinge is being replaced, a new part should be used in the place of the old part when
performing the following steps.
Tools needed to perform the following steps:
NOTE!
1. Rotate the hinge into the open position.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Step-by-Step Instructions
Make sure the corner of the "U" shaped
portion if the main flex film in not under the
hinge wrapping portion of the inner flip
cover.
Working Instruction, Mechanical
None
96(113)