Open Source Software - Dremel 3D40 FLEX Original Instructions Manual

Firmware Updates
Dremel recommends that firmware be updated whenever Dremel provides an update. Dremel will provide firmware
updating to improve performance and a dd additional features for the 3D40 FLEX throughout the life of the product.
There are two ways of updating the 3D40 FLEX: (1) Download update from www.dremel3d.com and install using
USB memory drive. (2) Connect the 3D40 FLEX to the internet and update from the 3D40 FLEX touch screen.
Open Source Software used in this Dremel product
This product contains software components that are licensed by the holder of the rights under any version of
the GNU General Public License (GPL), GNU Lesser General Public License (LGPL) or any other open source
software license which requires that source code be made available. You can receive a complete machine-readable
copy of the corresponding source code by sending a written request to:
Dremel
Attn: Open Source Software Officer
P.O Box 081126
Racine, WI USA 53408-1126
Your request should include: (i) the name of the Dremel product, (ii) the serial number (if applicable), (iii) the
software version (if applicable), (iv) your name, (v) your company name (if applicable) and (vi) your return mailing
and email address (if available). We may charge you a nominal fee to cover the cost of the physical media and
distribution. You may send your request (i) within three (3) years of the date you received the product that included
the software which is subject of your request or (ii) in the case of code licensed under the GPL version 3 for as
long as Dremel offers spare parts or customer support for that product.
Warranty regarding further use of the Open Source Software:
DREMEL provides no warranty for the Open Source Software programs contained in this device, if such programs
are used in any manner other than the program execution intended by DREMEL. The licenses listed below define
the warranty, if any, from the authors or licensors of the Open Source Software. DREMEL specifically disclaims any
warranties for defects caused by altering any Open Source Software program or the product s configuration. You
have no warranty claims against DREMEL in the event that the Open Source Software infringes the intellectual
property rights of a third party. Technical support, if any, will only be provided for unmodified software.

OPEN SOURCE SOFTWARE

552
A
p
a
s
I
I
s
T
a
c
t
a
c
l
g
a
a
I
y
T
r
A
c
a
G
(
R
(
i
b
W
B
t
3
t
f
t
R
n
o
i
e
T
t
•
•