Touch Screen - Dremel 3D40 FLEX Original Instructions Manual

Hide thumbs Also See for 3D40 FLEX:

Table of Contents

Available languages

Using your Dremel 3D40 FLEX without a computer is easy with the onboard software and full colour touch screen.

Before building your model we want to familiarize you with the touch screen menu structure and options.

OBSERVE ALL PROVIDED WARNINGS AND SAFETY INSTRUCTIONS WHEN USING THE

DREMEL 3D40 FLEX. FAILURE TO DO SO MAY RESULT IN FIRE, EQUIPMENT DAMAGE,

PROPERTY DAMAGE OR PERSONAL INJURY.

TOUCH SCREEN

Tap to select a 3D model and begin build process.

(See page 23 for detailed build instructions)

Tap Printer, USB Flash Drive, or Print Queue to

choose the destination of your desired file.

Tap to select the desired model or use arrows to

scroll through pages to find your model.

FILE DETAILS

BUILD – Tap to begin build process.

DELETE – Tap to remove model file from on-printer

storage or USB flash drive.

COPY TO PRINTER – From USB flash drive, tap to

copy model file to on-printer storage.

BUILD STATUS

STOP – Tap to cancel the current build process.

PAUSE/PLAY – Tap to pause or resume the current

build process. Pause will allow you to access the

filament button.

CHANGE FILAMENT – Tap to change filament during

the current build process to add more

filament or change colors.

Table of Contents