Touch Screen Icons - Dremel 3D40 FLEX Original Instructions Manual

DREMEL 3D40 IDEA BUILDER
FIRMWARE VERSION:
USAGE COUNTER:
PRINTER STATUS:
MAC:
!
!
!
Indicates that there is an error such as filament empty or door open.
!
!
!
Indicates that Ethernet is connected.
Indicates WiFi signal strength and if connected to WiFi symbol will be blue.
Indicates that the extruder is cool.
Indicates that the extruder is warm.
Indicates that the extruder is hot.
ABOUT
Tap to see 3D40 FLEX information such as firmware
version, usage counter, printer status, and MAC
address.
BACK HOME

TOUCH SCREEN ICONS

538