Figure 28 System Default Tag Settings - Yealink SIP-T4 Series Configuration Manual

Example System Default Tag Settings

Figure 28 System Default Tag Settings

5.2.1.2 Create Device Type-Specific Tags
Browse to System → Resources → Device Management Tag Sets and select Add to add
a new tag set. Configure the tag set name using the device name appended by Tags:
Yealink T4x_Tags. Add the device type-specific tags in the following table to the device
tag set. If the tag set already exists, make sure the tags are defined in the following table.
Tag Name
%COUNTRY%
%FEATURE_BW_CALL_
PARK%
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
Valid Settings
United States, Australia,
Austria, Brazil, Belgium,
China, Czech, Denmark,
Finland, France, Germany,
Great Britain, Greece,
Hungary, Lithuania, India,
Italy, Japan, Mexico, New
Zealand, Netherlands,
Norway, Portugal, Spain,
Switzerland, Sweden, Russia,
Chile, Czech ETSI
0
1
Description
Identifies the country for standard
ringtones.
Enable/Disable the call park feature
for the phone.
 0 = Disabled
 1 = Enable
20-BD5476-00
PAGE 50 OF 150