Yealink SIP-T4 Series Configuration Manual page 119

account.1.gruu.enable =
account.1.sip_server.1.failback_subscribe.enable =
account.1.hold_use_inactive =
account.1.features.usb_call_recording.enable =
##########################################################################
#############
##
##
##########################################################################
#############
account.1.security_classification.enable =
account.1.srtp_lifetime =
account.1.xsi.custom_url =
account.1.dialplan.digitmap.active.on_hook_dialing =
account.1.dialplan.digitmap.apply_to.directory_dial =
account.1.dialplan.digitmap.apply_to.forward =
account.1.dialplan.digitmap.apply_to.on_hook_dial =
account.1.dialplan.digitmap.apply_to.press_send =
account.1.dialplan.digitmap.enable =
account.1.dialplan.digitmap.interdigit_long_timer =
account.1.dialplan.digitmap.interdigit_short_timer =
account.1.dialplan.digitmap.no_match_action =
account.1.dialplan.digitmap.string =
account.1.hoteling.mode =
account.1.hoteling.pin =
account.1.flexible_seating.enable =
##########################################################################
#############
##
##
##########################################################################
#############
account.1.features.call_decline.enable =
account.1.call_recording.enable =
account.1.hoteling.expires =
##########################################################################
#############
##
##
##########################################################################
#############
account.2.enable = %BWLINE-BINARY-2%
account.2.label = %BWEXTENSION-2%
account.2.display_name = %BWCLID-2%
account.2.auth_name = %BWAUTHUSER-2%
account.2.user_name = %BWLINEPORT-2%
account.2.password = %BWAUTHPASSWORD-2%
account.2.outbound_proxy_enable = %USE_SBC_BOOLEAN%
account.2.outbound_proxy.1.address = %SBC_ADDRESS%
account.2.outbound_proxy.1.port = %SBC_PORT%
account.2.dial_tone =
account.2.outbound_proxy.2.address =
account.2.outbound_proxy.2.port =
##It configures the transport type for account 1. 0-UDP,1-TCP,2-TLS,3-DNS-
NAPTR
##The default value is 0.
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
V81-Beta Add
V81-Beta SP1 Add
Account2 Basic Settings
20-BD5476-00
PAGE 119 OF 150