Yealink SIP-T4 Series Configuration Manual page 24

Hide thumbs Also See for SIP-T4 Series:
Table of Contents

Advertisement

4.3.1.1
Bob's Phone Configuration – MAC.cfg
This is the SCA configurations as specified in MAC.cfg, that is, 0015651130dc.cfg where
"0015651130dc" is the MAC address of the SIP phone.
The following steps are used to configure line 1 for Bob's phone. This line rings when Bob
is called, so it has Bob's authentication information.
Step
Step 1
Step 2
Step 3
Step 4
The following steps are used to configure line 2 for Bob's phone. This line rings when Joe
is called, so it has Joe's authentication information.
Step
Step 1
Step 2
Step 3
Step 4
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
Command
Configure line as shared.
account.1.shared_line = 1;
Set Register User ID.
Example:
account.1.user_name = 2405551111_1;
Enable SIP Authentication.
Example:
account.1.auth_name = bobsmith;
account.1.password = bobs;
Configure display name.
Example:
account.1.display_name = Bob Smith;
Command
Configure line as shared.
account.2.shared_line = 1;
Set Register User ID.
Example:
account.2.user_name = 2405551111_2;
Enable SIP Authentication.
Example:
account.2.auth_name = joebrown;
account.2.password = joeb;
Configure display name.
Example:
account.2.display_name = Joe Brown;
Purpose
Configure the line as "shared"
(as opposed to "private").
The register user ID must
correspond with the line/port
setting on BroadWorks.
If the Authentication service is
configured on BroadWorks,
these parameters must be
configured to match the
BroadWorks settings.
This line rings when Bob is
called, so it has Bob's
authentication information.
Configure the name to be
displayed on the device for this
line.
Purpose
Configure the line as "shared"
(as opposed to "private").
The register user ID must
correspond with the line/port
setting on BroadWorks.
If the Authentication service is
configured on BroadWorks,
these parameters must be
configured to match the
BroadWorks settings.
This line rings when Joe is
called, so it has Joe's
authentication information.
Configure the name to be
displayed on the device for this
line.
20-BD5476-00
PAGE 24 OF 150

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents