Yealink SIP-T4 Series Configuration Manual page 112

##########################################################################
#############
##It configures the BLF List URI to monitor a list of users for account X.
##The default value is blank.
account.1.blf.blf_list_uri = %BWBLF-URI-1%
##It configures the feature access code for directed call pickup (default:
*97) for account X.
##The default value is blank.
account.1.blf_list_code = %BWFAC-DIRECTED-CALL-PICKUP-1%
##It configures the feature access code for directed call pickup with
barge-in (default: *33) for account X.
##The default value is blank.
account.1.blf_list_barge_in_code = %BWFAC-DIRECTED-CALL-PICKUP-WITH-BARGE-
IN-1%
##It configures the period (in seconds) of the BLF subscription for
account X.
##The default value is 1800.Integer from 30 to 2147483647.
account.1.blf.subscribe_period =
##It configures the event of the BLF subscription for account X.0-
Dialog,1-Presence.
##The default value is 0.
account.1.blf.subscribe_event =
##It enables or disables the phone to handle NOTIFY messages out of the
BLF dialog for account X.0-Disabled,1-Enabled.
##The default value is 0.
account.1.out_dialog_blf_enable =
##It configures the BLF List Retrieve call parked code for account X.
##The default value is blank
account.1.blf_list_retrieve_call_parked_code =
account.1.blf.match_host.enable=
##########################################################################
#############
##
##
##########################################################################
#############
##It enables or disables Broadsoft SCA feature for account X.0-Disabled,1-
Broadsoft SCA.
##The default value is 0.
account.1.shared_line = %BWSHAREDLINE-BINARY-1%
##It configures the BLA number for account X.
##The default value is blank.
account.1.bla_number =
##It configures the period (in seconds) of BLA subscription for account X.
##The default value is 300.Integer from 60 to 7200
account.1.bla_subscribe_period =
##Except T19P/T21P Models
##It configures the Call Pull Feature access code for account X.
##The default value is blank.
account.1.shared_line_callpull_code =
##It configures number of linekey for line.
##The default value is 1,you should enable auto line keys first.
account.1.number_of_linekey = %NUM_OF_LINEKEYS%
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
BLA/SCA
20-BD5476-00
PAGE 112 OF 150