Configure Broadworks User - Yealink SIP-T4 Series Configuration Manual

Figure 36 Device Profile Instance
5.2.4

Configure BroadWorks User

Configure the user with the desired BroadWorks configuration and services. Any services
that require a specific configuration on the device are managed via Device Management
and are defined in the device configuration files, if the template files are created with the
correct Device Management tags.
The device profile created in the previous section must be assigned to the BroadWorks
user. Assigning the device profile to the user automatically causes the Device
Management feature to generate the device configuration files for this user's device.
To assign the device profile to the user, browse to the BroadWorks <user> → Addresses.
Customize Tags
This section identifies custom tags used by the Yealink T4x that may need to be
customized at the group or device profile. Customizing a tag at the group level overrides
the setting on the device profile type for the device profiles created within the group.
Customizing a tag at the device profile level overrides the setting at the device profile type
and/or group level for the individual device profile.
5.2.4.1 SBC Address Customization for Edge Device
In many deployments, an edge device, such as an enterprise SBC or application layer
gateway, is deployed on the enterprise edge. The edge device's SIP server or outbound
proxy setting is configured with the service provider's SBC IP address or FQDN. If there is
no edge device, the following customization does not apply.
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
20-BD5476-00
PAGE 65 OF 150