Appendix A: Reference T4X Configuration Files - Yealink SIP-T4 Series Configuration Manual

Hide thumbs Also See for SIP-T4 Series:
Table of Contents

Advertisement

Appendix A: Reference T4x Configuration Files

The following is a reference configuration for the T48G configured for use with
BroadWorks.
NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT
AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the
configuration files obtained from Yealink with the specific release to generate your configuration files.
System Default File: y000000000054.cfg
NOTE: This is an example file and it should be used for reference only.
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must
be placed in the first line.##
##This template file is applicable to SIP-
T21_E2P/T19_E2P/T23P/T40P/T27P/T29G/T46G/T48G/T42G/T41P/T48S/T46S/T42S/T41
S/T27G/T61/T66 IP phones running firmware version 72 or later.##
##For more information on configuration parameters, refer to Yealink_SIP-
T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide.##
##########################################################################
#############
##
##
##########################################################################
#############
static.network.dhcp_host_name =
##########################################################################
#############
##
##
##########################################################################
#############
##It enables or disables the PC port.0-Disabled,1-Auto Negotiation.
##The default value is 1.It takes effect after a reboot.
static.network.pc_port.enable =
##It configures the transmission mode and speed of the Internet (WAN)
port.
##0-Auto Negotiate
##1-Full Duplex 10Mbps
##2-Full Duplex 100Mbps
##3-Half Duplex 10Mbps
##4-Half Duplex 100Mbps
##5-Full Duplex 1000Mbps (only applicable to SIP-T42G and SIP-T46G IP
phones)
##The default value is 0.It takes effect after a reboot.
static.network.internet_port.speed_duplex =
##It configures the transmission mode and speed of the PC (LAN) port.
BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
2017 BROADSOFT INC.
©
Hostname
Network Advanced
20-BD5476-00
PAGE 76 OF 150

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents