Table of Contents
Advertisement
5. Release the harnesses from the wiring stoppers on the
PS-667 board.
6. Disconnect the harnesses from the connectors CN1 to
CN6, CN9, and CN10 on the PS-667 board.
CN9
CN5
CN4
CN3
CN2
PS-667 board
7. Remove the four screws, and remove the wiring
stoppers and the PS-667 board.
PWH3 x 6
Wiring stoppers
1-22 (E)
Wiring stoppers
CN6
CN10
CN1
PWH3 x 6
PS-667 board
8. Install a new PS-667 board in the reverse order of
removal.
m
. When installing the PS-667 board, rearrange the
harnesses as shown in the figure and fix them with
the wiring stoppers on the PS-667 board.
PS-667 board
Wiring stoppers
WLL-RX55
Advertisement
Table of Contents
