Page 2
WARNING WARNING This unit has no power switch. To prevent fire or shock hazard, do not expose the unit to rain When installing the unit, incorporate a readily accessible or moisture. disconnect device in the fixed wiring, or connect the power cord to socket-outlet which must be provided near the unit and To avoid electrical shock, do not open the cabinet.
Page 3
For the customers in Europe installation. This equipment generates, uses, and can radiate Hereby, Sony Corporation, declares that this WLL-RX50 is in radio frequency energy and, if not installed and used in compliance with the essential requirements and other relevant accordance with the instructions, may cause harmful provisions of the Directive 1999/5/EC.
Page 4
Para los clientes de Europa For kunder i Europa Sony Corporation declara aquí que este modelo, WLL-RX50, Sony Corporation erklærer herved, at denne WLL-RX50 er i cumple los requisitos esenciales y demás provisiones overensstemmelse med de essentielle krav og andre pertinentes de la Directiva 1999/5/EC.
Table of Contents Overview ................6 Features ..................6 System Configuration Examples ..........6 Locations and Functions of Parts ........8 Operation Panel (Front) ............8 Connector Panel (Rear) ............. 9 Installation of Antenna and Down-Converter ....10 Using the mounting bracket ............ 10 Mounting to a tripod ...............10 Rack Mounting ..............
It is possible to configure diversity reception systems with multiple receivers for more stable transmission resistant to multipath fading. The WLL-RX50 is a receiver for a wireless camera system Time-interleaving function built in that transmits MPEG-2 video and audio in the 2.4 GHz Thanks to the time interleaving technology, the unit is band.
Page 7
Diversity reception system (one transmitter to two or three receivers) For 3-channel diversity reception Antenna + Down-converter WLL-RX50 (3) WIRELESS CAMERA RECEIVER WLL-RX50 STREAM SYSTEM ALARM MENU EXT 1 ENTER RESET EXIT 2 Antenna + Down-converter For 2-channel diversity reception...
Locations and Functions of Parts Operation Panel (Front) WIRELESS CAMERA RECEIVER WLL-RX50 STREAM SYSTEM ALARM MENU EXT 1 ENTER RESET EXIT 2 a Power switch e Liquid-crystal display i RESET button d ALARM indicator h MENU key c SYSTEM indicator...
320- to 420-MHz band. c STREAM EXT IN (external input) connectors (BNC type) For a diversity reception system, connect with the STREAM OUTPUT connectors of other WLL-RX50 units. d STREAM OUTPUT connectors (BNC type) These connectors output DVB-ASI singals. Connect with the DVB-ASI input of an MPEG decoder (ex.
Fix the bracket to a pole (20 to 36 mm dia. ). Installation of Antenna Pole and Down-Converter Caution Be sure to connect the down-converter securely to the antenna, or the down-converter may fall down. Be sure NOT to directly connect the down-converter to a large antenna.
How to mount Rack Mounting Remove the four legs from the bottom of the receiver, after fisrt removing their screws. The WLL-RX50 can be mounted in a standard 19-inch rack. Caution • Securely bolt the rack to a strong floor, to prevent...
IF INPUT connector, because phantom power is supplied to the IF INPUT connector. Doing so may cause fire or failure. 3-Channel Diversity Antenna + Reception System Down-converter WLL-RX50 INPUT STREAM DC-IN 10.5-17V -AC IN INPUT OUTPUT...
Press a cursor key to move the cursor (>) to the item Menu Settings to be set. Pressing the down-arrow cursor key moves the cursor downwards, and pressing the up-arrow cursor key You can obtain information and perform various settings moves it upward, scrolling the display.
Press the ENTER key. Error Messages Your setting becomes valid, and the unit returns to the Menu Item Selection mode. To cancel the change If an error is generated, the ALARM indicator flashes, and Press the MENU key instead of the ENTER key. "Warning"...
Supplied accessories Specifications Reception antenna (1) Down-converter (1) Mounting bracket (1) Mounting screw: M3 (2), M4 (4) General Coaxial cable with N-type connectors (10 m) (1) Power requirements Fasten belt (5) AC100 V to 240 V, 50/60 Hz, Operation Manual (1) 450 mA max.
Page 16
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...