Advanced Setting - Furuno WR2120 Operator's Manual

2.4. Advanced Setting

1) Setting
Press [Ctrl] + [Alt] and click [Setting] simultaneously to open advanced menu in the settings menu.
1. Display
Echo update:
Select the echo display update type:
・No Update:
Radar echo will not display on screen.
This can substantially reduce the CPU load.
・Flash Update:
Radar echo display will only update after one full
rotation. This can help reduce the CPU load.
・Round Update (Default setting):
Updates the Radar echo display in real-time. It keeps loading a standard CPU. (Default setting)
Note: [Factory setting] in the Advanced setting menu is for
manufacturer use only.
2. Radar: Only for the manufacturer use.
3. Serial number (Only for the manufacturer use)
Serial number: Indicate the serial number of the radar.
Product number: Indicate the product number of the radar.
Product name: Indicate the product name of the radar.
4. Application Startup
Automatic connection:
ON: It will automatically connect and start TX operation
after RainMap startup.
OFF: It will not connect and TX the RainMap after startup.
Therefore it has to connect and start TX manually
when set this off.
Automatic schedule reboot:
Select ON or OFF. It uses a preset schedule to
reboot the radar automatically. (It will not connect to
the radar)
Schedule Date/Time:
Setup the schedule for year/month/date/time (hh/mm/ss) to restart RainMap and PC automatically.
Automatic TX after reboot:
ON: It will restore to the previous state before the RainMap was restarted.
OFF: This function is not implemented.
e.g.1: If set to [ON], RainMap will connect and automatically start TX operation again if RainMap was
previously connected and radar was in TX mode before restarting the DPU.
e.g.2: If set to [ON], RainMap will stay at startup only (it will not connect and start TX) if RainMap was
previously not connecting to the radar before restarting the DPU. (Automatic connection setting
must be OFF)
e.g.3: If set to [ON] and Automatic connection [ON] RainMap will connect and automatically start TX
operation even if RainMap was not previously connecting to the radar before restarting the DPU.
S2E-17-0208_OM_WR2120_C
20