Furuno WR2120 Operator's Manual page 43

Disp
Select：
Select a data type to display.
・ R： Intensity of rainfall
・ Zh： Reflection intensity factor of horizontal
polarimetric radar
・ V： Doppler velocity
・ Zdr： Radar reflection factor difference
・ Kdp： Propagation phase difference rate of change
・ φdp: Differential Phase Shift (cross polarization)
・ ρhv: Co-polar correlation coefficient
・ W: Doppler velocity spectral width
Ratio of transparency [%]:
Set the echo returns transparency.
Map：
Display a background map image from map file (*.bmp
*.png).
SRHI screen：
・ 90 degrees screen (Displays SRHI echo at 90
degrees on sub screen)
・ 180 degrees screen (Displays SRHI echo at 180
degrees on sub screen )
Invalid data area:
Turn ON/OFF the invalid data area indication.
Signal shading area:
Select the signal shading area indication.
OFF: Hidden, 1: Grayed out, 2: Gray scale
Signal extinction area:
Select the signal extinction area indication beyond the
strong rain area.
OFF: Hidden, 1: Grayed out, 2: Gray scale
S2E-17-0208_OM_WR2120_C
Ground clutter rejection area:
Select the ground clutter rejection indication
area.
OFF: Hidden, 1: Grayed out, 2: Gray scale
Ground clutter rejection level:
Select the level of ground clutter rejection, 0
to 7.
Pulse blind area:
Select the pulse blind area indication zone.
OFF: Hidden, 1: Grayed out, 2: Gray scale
Sector blank:
Select the sector blank indication.
OFF: Hidden, 1: Grayed out, 2: Gray scale
Clear：
Rain file data will be cleared from screen.
34