Table of Contents
Advertisement
31 March 1994
11.9 4TH/5TH MIRROR HEIGHT ADJUSTMENT
When:
Parallelogram (skewed) image appears.
Purpose:
To maintain the proper copy image.
Measure:
Turn 4th/5th mirror height adjustment screw.
How:
Changes the 4th/5th mirror height.
CAUTION: Never perform this adjustment until you have positively
verified that the source of the skewing is optical and not in
the paper path.
[B]
1. Turn off the main switch and remove the exposure glass. (See Exposure
Glass Removal.)
2. Remove the seal [A] on the lens housing cover [B].
NOTE: Save the seal [A], because it is used again after the adjustment.
3. Adjust the 4th/5th mirror height by turning the screw [C] through the hole
[D] of the lens housing cover. Refer to the arrows in the illustration.
4. Place the seal [A] again on the hole of the lens housing cover.
REPLACEMENT AND ADJUSTMENT
43
[A]
[D]
[C]
Advertisement
Table of Contents
