Table of Contents
Advertisement
REPLACEMENT AND ADJUSTMENT
– Registration Rollers –
[E]
[F]
[C]
6. Remove the registration clutch. (See Registration Clutch Replacement.)
7. Remove the front and rear holders [A] (1 screw, pressure spring, and
E-ring each) of the upper registration roller.
8. Replace the upper registration roller [B].
9. Remove the 2 bushings [C] (1 E-ring each).
10. Remove the screw [D] securing the upper and lower guide plates [E].
11. Remove the lower registration roller [F] together with the upper and lower
guide plates; then, replace the lower registration roller.
NOTE: To install the lower registration roller, refer to page 5-58 of the
A110/A111 copier service manual.
[B]
[A]
[D]
[C]
36
31 March 1994
[A]
Advertisement
Table of Contents
