Table of Contents
Advertisement
31 March 1994
9.3.5 Sorter Installation (Option)
[B]
[A]
1. Do steps 1 to 5 of the installation procedure for the A110/A111 copier
(page 13 of the section for the sorter).
2. Install the magnet catch [A] on the exit unit [B] (2 screws).
NOTE: When installing the magnet catch [A] for the A128 copier, be sure
to use the two tapping screws included in the plastic bag which is
located on the inner side of the rear cover.
3. Do steps 7 to 20 of the installation procedure for the A110/A111 copier
skipping steps 9 and 11 (page 14 to 15 of the section for the sorter).
INSTALLATION REQUIREMENTS
25
Advertisement
Table of Contents
