Table of Contents
Advertisement
REPLACEMENT AND ADJUSTMENT
11.3 ENTRANCE SEAL REPLACEMENT
[A]
[B]
[E]
[C]
[K]
[G]
1. Remove the cleaning unit and cleaning blade. (See Cleaning Blade
Removal.)
2. Remove the used toner. (See Used Toner Collection of the A110/A111
copier.)
3. Clean the cleaning unit with a vacuum cleaner.
4. Remove the entrance seal [A] together with the strip of 2 sided tape [B]
and both of the 2 sided seals [C] which secure the entrance seal [A] to
the lower casing [D] and the side seals [E].
5. Clean the lower casing [D] with alcohol. Make sure that no tape remains
on the casing surface and the side seals.
[D]
[H]
[F]
32
[E]
[L]
1.5±0.5mm
[I]
[J]
[M]
31 March 1994
[E]
[F]
[K]
[N]
Advertisement
Table of Contents
