Table of Contents
Advertisement
INSTALLATION REQUIREMENTS
9.3.4 Document feeder Installation (Option)
[E]
[D]
1. Install the power supply unit.
Refer to the installation procedure enclosed with the power supply unit
(A525).
2. Remove the following parts from the copier.
1) Platen cover [A] (2 push-locks)
2) Platen cover pedestal [B] (4 screws)
3) 2 screws [C] for fixing the operation panel
4) Rear cover [D] (4 screws)
3. Cut the two links of the large harness cap [E] with nippers and remove it.
4. Do steps 6 to 31 of the installation procedure for the A110 copier (not
A111 copier) on page 28 to 32 of the section for the document feeder.
[A]
[B]
24
31 March 1994
[C]
Advertisement
Table of Contents
