Proxima Oviation 842 Quick Start Manual page 42

Chapter 3 • Using the Projection Panel
Mono Audio
If you are using a monaural source but wish to simulate stereo
output, complete the following steps:
1. Open the Input Source menu and access Source Select.
2. Choose the source (e.g. Video).
3. Open the Audio menu and access Source.
4. If the monaural source is connected to the AUDIO IN Left
connector (see page 2-12), choose Left. If the monaural
source is connected to the AUDIO IN Right connector (as in
this example), choose Right.
The source you chose under the Input Source menu (in this case,
Video) will now accept monaural input and will output simulated
stereo audio.
If you will be using another video source (e.g. Computer), but do
not want any audio associated with it, complete the following
additional steps:
5. Return to the Input Source menu and access Source Select.
6. Choose the source (e.g. Computer) you will be using without
any audio.
7. Open the Audio menu and access Mute.
8. Select Mute.
When you close the menus, the settings will be saved. In the
above example, the panel will activate simulated stereo audio
when you select your Video source and will mute all audio when
you select your Computer source.
User's Guide • 3–21