Chapter 2 • Setting Up the Projection Panel
Data can be viewed on a separate monitor in addition to the
Monitor
projection panel. This connection can be made with the
Connection
projection panel and computer power on.
1. Connect the monitor's video cable to the projection panel's
TO MAC MONITOR or TO VGA MONITOR connector.
CLOPS
TO MAC MONITOR
TO VGA MONITOR
FRO
Figure 13
The projection panel's TO MAC MONITOR and TO VGA
MONITOR connectors
2. Turn the monitor power on.
Never connect monitors to the TO MAC MONITOR
Note:
and TO VGA MONITOR ports at the same time.
User's Guide • 2–7