Cyclops Connection - Proxima Oviation 842 Quick Start Manual

Chapter 2 • Setting Up the Projection Panel
CYCLOPS
Connection
2–8 • User's Guide
Use the CYCLOPS connector to connect the projection panel to
the computer to use the optional Cyclops interactive pointer
system, the Presentation Control Software, or a Microsoft-
compatible mouse (see page 3-5).
Figure 14
The projection panel's CYCLOPS connector
The optional Cyclops or Presentation Control Software are
shipped with their own Installation and User's Guides, and
additional cables (if needed) to connect the projection panel to
the computer.
1. Connect one end of the appropriate cable to the projection
panel's CYCLOPS connector.
2. Connect the other end of the cable to the computer.
• On an IBM-compatible PC, connect the computer end to
a Serial port.
• On a Macintosh, connect the computer end to an ADB
connector.
CYCLOPS
SERIAL