Table of Contents
Advertisement
Chapter 3 • Using the Projection Panel
3–20 • User's Guide
As described in Audio Connections (see p. 2-11), you can
incorporate audio into your presentation in a variety of ways. In
order to configure your system, follow the instructions below.
Stereo Audio
If you wish to use a source with true stereo audio output,
complete the following steps:
1. Open the Input Source menu and access Source Select.
2. Choose the source (e.g. Video).
3. Open the Audio menu and access Source.
4. Choose Stereo.
The source you chose under the Input Source menu (in this case,
Video) will now accept and output stereo audio.
If you will be using another video source (e.g. Computer), but do
not want any audio associated with it, complete the following
additional steps:
5. Return to the Input Source menu and access Source Select.
6. Choose the source (e.g. Computer) you will be using without
any audio.
7. Open the Audio menu and access Mute.
8. Select Mute.
When you close the menus, the settings will be saved. In the
above example, the panel will activate stereo audio when you
select your Video source and will mute all audio when you select
your Computer source.
Advertisement
Table of Contents
