Serial Port Connection (To Panel); Video Connections - Proxima Oviation 842 Quick Start Manual

Serial Port
Connection
(To Panel)
Video
Connections
Chapter 2 • Setting Up the Projection Panel
A separate Microsoft-compatible mouse can be connected to the
SERIAL port connector on the projection panel to control the
panel's built-in LightBoard drawing capability. This mouse can
also be used to navigate the panel's menus in Local Mode (see
page 3-6) or function as the computer system's mouse in Host
Mode.
Figure 15
The projection panel's SERIAL port connector
TV video (NTSC, PAL or SECAM) may be displayed on
video-ready projection panels. Find the circular connector on the
camcorder, laserdisc player, VCR, or other video source marked
Video Out or something similar. This connector accommodates
the RCA cable supplied with video-ready panel models. On most
video equipment, this connector will be yellow.
Figure 16
The projection panel's VIDEO IN connector for
NTSC/PAL/SECAM
The projection panel comes with an audio-visual cable with three
RCA connectors on each end.
1. Insert one of the cable's yellow connectors into the VIDEO
OUT jack of the video source device.
2. Insert the other yellow connector into the projection panel's
yellow VIDEO IN connector.
The audio-visual cable's remaining connectors (red and white) can
be used to attach audio (see Audio Connections, page 2-11).
CYCLO
DEO IN SERIAL
S-VHS
VIDEO IN SERIA
User's Guide • 2–9